Reduce Scrapping and Smelting, Promote Component Reuse   >   Unpowered, Hand Tools   >   Woodworking Tools   >   Cook County   >   Used   >   Farmall cub ~ ih 5 ft. ~ C3 finishing mower complete

Farmall cub ~ ih 5 ft. ~ C3 finishing mower complete


All three spindles turn freely and smoothly, The bearings are in good condition. The deck is solid , There are 3 small cracks around the edge of the deck, the longest being about an inch and one half long.(1 is pictured) Both skid shoes are solid . This also includes; The pulley to mount on your PTO,The bushing in the center of the pulley is damaged,the spline is still good , It was used like this but I would replace it. The bushing can be purchased through Case/IH. Also includes the three belts to operate the mower. Also the PTO shield. The belts are in good condition . There is some rust pitting on these items. There are some cracks on the center belt pulley shield on top (pictured). The three blades are in good condition. Also included is the pulley assembly, the 2 belt pullies on the pulley assembly are in good condition. I don't see any repairs. The 2 tail wheels swivel properly. The mower does operate good and runs smoothly. It does a good job. Solid good condition.
I can store this mower until you can make arrangements to pick it up.



Farmall cub ~ ih 5 ft. ~ C3 finishing mower complete Farmall cub ~ ih 5 ft. ~ C3 finishing mower complete Farmall cub ~ ih 5 ft. ~ C3 finishing mower complete Farmall cub ~ ih 5 ft. ~ C3 finishing mower complete Farmall cub ~ ih 5 ft. ~ C3 finishing mower complete Farmall cub ~ ih 5 ft. ~ C3 finishing mower complete Farmall cub ~ ih 5 ft. ~ C3 finishing mower complete Farmall cub ~ ih 5 ft. ~ C3 finishing mower complete Farmall cub ~ ih 5 ft. ~ C3 finishing mower complete Farmall cub ~ ih 5 ft. ~ C3 finishing mower complete Farmall cub ~ ih 5 ft. ~ C3 finishing mower complete Farmall cub ~ ih 5 ft. ~ C3 finishing mower complete