Reduce Scrapping and Smelting, Promote Component Reuse > Unpowered, Hand Tools
> Woodworking Tools
> Cook County
> Used
> 10 ft x 20 ft white canopy kit shade
10 ft x 20 ft white canopy kit shade
This kit comes with everything (except tubing) you need to complete assemble.
Any of our Canopy parts can be re-ordered! if you like to order the parts individually, Click Here
To see other type of Canopy Kit or Tent, please click below,
3/4" Super Value Canopy Kit, 3/4" Eco Value Canopy Kit, 1" DX Value Canopy Kit, 1 3/8" HD Value Canopy Kit,
3/4" Economy Canopy Kit, 1" Deluxe Canopy Kit, 1 3/8" Heavy Duty Canopy Kit, 1 5/8" Super Heavy Duty Canopy Kit,
1 7/8" Commercial Canopy Kit, Party Type Canopy Kit, Pop Up Tent, All-In-One Canopy Kit & Tent
* Tubing Cutting Instruction
Space Center TopECO VALUE CANOPY KIT IS EASY TO ASSEMBLE AND NO TOOLS NEEDED!
Angle Canopy Dimension Tubing Size
It is made with Heavy Duty Tarp, 3/4" Metal Fittings and Ball type Bungee.
The Tubing will slide into the fitting, Secure Tubing with attached Thumb Screws.
Use 3/4" EMT (Electrical Metal Tubing), which can be purchased from
local hardware or building supply stores.
Or any Metal Tubing that has Outside diameter between 3/4" to 7/8".
The PVC (Polyvinyl chloride) is Not recommended to use as Tubing.
Eco Value Canopy Kit is not only the low cost answer,
but also provides unlimited usage in any events. Space Center Bottom Space Center TopFitting Fitting
Tarp Ball Bungee THIS KIT COMES WITH FOLLOWING PARTS
*4 - 3/4" Value Metal Low Peak Corner Fitting
*2 - 3/4" Value Metal Low Peak End Fitting
*2 - 3/4" Value Metal Low Peak Side Fitting
*1 - 3/4" Value Metal Low Peak Center Fitting
*1 - 10x20 Heavy Duty White Tarp
*12x14 Mesh Count, 5 oz per square yard, 11-12 mil thickness
*Mildew & Rot Resistance, Acid Resistant
*Hem reinforced with Plastic rope
*UV Treated on both side - For Longer Protection
*Reinforced Corner with Plastic Patch
*Finished Sizes are 6" to 8" smaller
Canopy DimensionYou will need 18 pieces of 3/4 inch EMT(Electrical Metal Tubing),
or Metal Tubing that has Outside diameter between 3/4" to 7/8", which can be purchase from your local Hardware store.
The PVC (Polyvinyl chloride), is Not recommended.
*6 - 10 feet for the Ridge Poles
*6 - 6 feet 8 inch for the Legs
(If needed, trim the Tubing bit shorter to close the gaps on roof)
1. Place the Fittings in their proper places as illustrated on
2. Starting from one side, slide the Tubing into the Fittings. Secure
the Tubing by turning the Screws that are attached on Fittings.
3. Place the Tarp on the Roof Frame. Secure it with the
Ball Bungee as shown in the diagram below.
4. Lift one side of the Roof Frame and Slide the tubing (legs)
into the Fittings. Secure the tubing with the Screws.
5. Repeat Step 4 for the other side.
Space Center Bottom Space Center TopDiagram
Any of our Canopy parts can be re-ordered
Here is the list of parts used and can be
click the part name or swatch on right.
For additional accessories, such as
side, end wall, foot pads and stakes,
Discount will be automatically calculated,
when you checkout all at the same time.
*4 - 3/4" Value Metal Low Peak Corner Fitting(P3)
*2 - 3/4" Value Metal Low Peak End Fitting (PT)
*2 - 3/4" Value Metal Low Peak Side Fitting (P4)
*1 - 3/4" Value Metal Low Peak Center Fitting (PX)
*1 - 10x20 Extra Heavy Duty Tarp
Silver Tarp White Tarp Green Tarp Silver/White Tarp Clear Tarp
*1 - 10x20 Extra Heavy Duty Valance Tarp
Silver Tarp White Tarp Clear Tarp
*1 - 10x20 Flame Retardant Tarp
*1 - 10x20 Sun Screen Mesh Tarp
For more info or to purchase, click the items below!
