Reduce Scrapping and Smelting, Promote Component Reuse > Unpowered, Hand Tools
> Repair Tools and Wrenches
> Cook County
> Rocker milling clamps unimat traditional M6
Rocker milling clamps unimat traditional M6
Set of 2 hold down clamps of a non-symmetrical, more traditional shape, four M6 screws and 4 washers (please double check your thread size). More traditional shape gives higher auto adjustment capability without stacking blocks (0 to 1-1/8), but the trade-off is a slightly higher profile when holding thinner material. The button-head bolts low head design definitely helps keep this to a minimum though. This would be a great start, and then add stacking blocks later if you find you need the extra height, though 1-1/8" without the stacking blocks is nothing to sneeze at. These are extremely handy little clamps for holding work pieces down on a milling table, tooling plate or fixture. The self adjusting height is a real time/frustration saver. Optional range extender stacking blocks and longer screws are available (please check other items, or ask).
- comes with two 1" and two 1-1/2" long M6 button-head cap-screws
8 - 32, 10 - 32 and 1/4" - 20 sets also available (please check sellers other items or ask).