Reduce Scrapping and Smelting, Promote Component Reuse > Unpowered, Hand Tools
> Metalworking Tools
> bridgeport 2HPVARI-speed, acu- readout SERVO140 power
bridgeport 2HPVARI-speed, acu- readout SERVO140 power
BRIDGEPORT 2 HP SERIES 1 MILLING MACHINE WITH VARIABLE SPEED HEAD,9X42 TABLE,ACU-RITE READOUT SERVO 140 POWER FEED,POWER DRAW BAR,VICE,COLLETS AND CHROME WAYS IN EXCELLENT CONDITION.
THIS MACHINE WAS AQUIRED FROM A LOCAL PATTERN SHOP THAT WAS THE ORIGINAL OWNER AND WAS EXCESS DUE TO DOWNSIZING OF THEIR WORK LOAD
THIS MACHINE IS IN VERY NICE CONDITION AS RECEIVED,TAKE A GOOD LOOK ON THOSE PICTURES CHECK THE NEW PAINT ON IT LOOKS LIKE NEW .
THE X AND Y SCREWS ARE IN VERY GOOD CONDITION ,BACKLASH ON THE X AND Y AXIS IS LESS THAN .010 AND THE TABLE IS SMOOTH AND EVEN OVER ITS FULL LENGTH.
THE 2HP HEAD RUNS VERY GOOD,AND ALL FEATURES OF THE HEAD WORKS PROPERLY
THE CHROME WAYS ARE IN VERY VERY NICE SHAPE .
THE NEW PAINT ON THE MACHINE IS IN EXCELENT OVERALL CONDITION
THE LUBE SYSTEM IS FUNCTIONAL AND THE BIJUR LUBE SYSTEM HAVE BEEN TESTED AND IS FUNCTIONAL
IF ANY ONE IS LOOKING FOR A GOOD BRIDGEPORT THIS THE ONE FOR LESS THAN HALF THE PRICE OF NEW
THIS BRIDGEPORT WAS USED VERY LIGHTLY,CHROME WAYS LOOKS VERY GOOD
BRIDGEPORT 9X42VERTICAL MILLING MACHINE
2 HP 220/440 VOLT THREE PHASE OPERATION
SIZE 54X48X84 TALLX TRAVEL 32" Y TRAVEL 12" Z TRAVEL 16" QUILL 6"
POWER DOWNFEED RANGES(3) .0015 .003 .006 IPR
SPINDLE SPEEDS 60-500 RPM BACK GEAR and 500-4200 RPM DIRECT DRIVE
3 3/8 QUILL DIAMETER WITH PRECISION ANGULAR CONTACT BALL BEARINGS
BIJUR ONE SHOT LUBRICATION SYSTEM
THIS IS A VERY NICE MACHINE THAT HAS BEEN TESTED AND WILL BE READY TO USE WHEN RECIEVED AT YOUR FACILITY
YOU ARE WELCOME TO COME BY AND SEE THIS MACHINE BY APPOINTMENT
IF YOU HAVE ANY QUESTIONS YOU CAN CALL 248.939.0791 AND ASK FOR TOM
