Reduce Scrapping and Smelting, Promote Component Reuse > Unpowered, Hand Tools
> Diagnostic Tools
> DuPage County
> 4 oz cast iron liquid ceramic coat coating
4 oz cast iron liquid ceramic coat coating
Thermal Barrier Coatings (TBC s) are designed to reduce the movement of heat. In some instances, such as exhaust systems, you want to keep the heat within the part. In combustion chambers you want to use the heat generated by combustion to push down on the piston rather than bleed off into surrounding surfaces. Due to continued testing we are learning that simple thermal barrier action is not the only characteristic that is important. In fact certain TBC s will move an engine into detonation. TBC coatings can be made from a variety of materials. Ceramics get the most attention, though there are other materials that are superior in specific applications. The proper choice is critical to the overall function of the coating. Pendry Powder Coatings (PPC) makes available a full range of exhaust system coatings that can be applied at home. TECH LINE COATINGS, INC. offers the most technologically advanced coatings on the market. These coatings include the most popular type of coating in use today, a metallic ceramic. These coatings are the same products being applied by professional coating shops and give the individual the opportunity to benefit from this advanced technology at both a cost and time savings. For those who do not wish to do their own coating work, or wish to have TECH LINE specialty coatings applied, PPC service coatings can apply them for you.- (APPLICATION ).... Air Brush or Touch up paint gun . Sandblast with aluminum oxide or fine silica sand. DO NOT USE GLASS BEAD!!!. Spray at 40 to 60 psi. with moisture separator attached to gun .. Requires curing part(s) at 500 degrees for 1 hour. ........ (APPROXIMATE COVERAGE) ALL CERAMIC COATINGS .= SINGLE BIKE PIPE 1.5 - 2.5 OZ. 2 INTO 1 BIKE PIPES 2.5 - 5.0 OZ. SMALL V8 HEADERS AND CAST IRON MANIFOLDS 5 OZ. PER PAIR MEDIUM V8 HEADERS 5 TO 10 OZ. PER PAIR LARGE V8 HEADERS 10 TO 15 OZ. PER PAIR.- FULL INSTRUCTIONS WILL BE SENT WITH COATING .
