Reduce Scrapping and Smelting, Promote Component Reuse > Engine Powered
> Turbine
> DuPage County
> New
> Copper mechanical power lugs / connectors #2 - #14 awg
Copper mechanical power lugs / connectors #2 - #14 awg
~~~ 4 Copper Mechanical Lugs for connecting (2) #8 - #2 and (2) #14 - #6 power cable. ~~~
Offset two hole copper mechanical lugs made by ILSCO for connecting #8 - #2 AWG power cable and #14 - #6 AWG power cable to a bus bar or anything else. There are 2 different sizes as followin:
Two of the Lugs: Two of the lugs are for connecting #8 to #2 AWG cables using the compression screws. They have an offset tongue with 2-holes. Each hole is 1/4 inch in diameter and 1 inch apart measured from center of hole to center of the other hole. The tongues are 1/2 inch wide.
The other two Lugs: The other two lugs are for connecting #14 to #6 AWG cables using the compression screws. They have an offset tongue with 2-holes. Each hole is 3/16 inch in diameter and 1 inch apart measured from center of hole to center of the other hole. The tongues are 3/8 inch wide.
You will get 4 lugs/connectors in total as described in the two above paragraphs. The copper lugs/connectors are like NEW, never been used and in excellent condition.
