Reduce Scrapping and Smelting, Promote Component Reuse > Engine Powered
> Gasoline Powered
> Cook County
> New
> 1978 case 350 bulldozer with 6 way blade
1978 case 350 bulldozer with 6 way blade
1978 CASE 350 BULLDOZER WITH ROPS. THIS BULLDOZER HAS BEEN USED MOSTLY ON 2 FIVE ACRE PARCELS IN THE PAST TEN YEARS. MOSTLY FOR LIGHT LAND CLEARING. WHEN IT WAS BOUGHT APPROX 10 YEARS AGO IT HAD A NEWLY REBUILT ENGINE, AND NOW HAS APPROX 780 HOURS. THE UNDER CARRIAGE WAS REPLACED SINCE THAT TIME( ROLLERS, PINS, TRACK ECT), UNKNOWN EXACT HOURS BUT 90% + CONDITION.
THE ENGINE RUNS GOOD, TRANSMISSION SHUTTLE OPERATES GOOD, ALL HYDROLICS ARE IN GOOD SHAPE. 6 WAY BLADE, BLADE CUTTING EDGE IN GOOD CONDITION. NO CYLINDER LEAKS, HOSES ONBLADE WERE REPLACED WITHEN THE PAST TWO YEARS BUT MACHINE HAS PROBABLY ONLY HAD A MAXIMUM OF TEN HOURS USE IN PAST TWO YEARS. THE ENGINE OIL & FILTER, THE FUEL FILTERS, THE TORQUE CONVERTER FLUID AND FILTERS REPLACED WITHEN THE LAST 2 HOURS OF USE.
MOST OF THE ENGINE GAGES WORK ( OIL PRESSURE GAGE, TEMP GAUGE, NOT SURE IF THE AMP METER WORKS) THE TORQUE CONVERTER TEMP GAUGE WORKS) NONE OF THE INDICATOR LIGHTS WORK ( HEADLIGHTS NON FUNCTIONING, AS WELL AS REAR LIGHT, AND DASH LIGHTS) DUE THE FAILURE OF THE TORQUE CONVERTER COOLER, AN AFTER MARKET EXTERNAL COOLER WAS ADDED AND PLACED ON THE FRONT OF THE RADIATOR.
PLEASE SEE ALL PHOTOS, THE BODY HAS DENTS AND DINGS AND COULD REALLY USE A PAINT JOB. IT NEEDS TO HAVE THE EXTENDED EXHAUST PIPE REPLACED ( ITS FAIRLY LOOSE) THERE HAS BEEN A SLIGHT LEAK IN THE PAST ON THE HYDROLIC RESOVOR RETURN INLET ( SLIGHT HYDROLIC LEAK BUT DOESNT SEEM TO BE LEAKING NOW)
THIS MACHINE IS IN GOOD SHAPE FOR THE MOST PART, A GOOD WORKER, JUST NEEDS A LITTLE TLC. THIS MACHINE HAS HAD LESS THEN 10 HOURS USE IN THE LAST COUPLE OF YEARS AND HAS BEEN SITTING.
ALSO THROWING IN A HOMEMADE BRUSH RAKE WHICH IS REMOVEABLE WITH PINS / ATTACH TO TOP OF BLADE. AND WILL PROVIDE THE NEW OWNER WITH A VERY THICK FACTORY SERVICE MANUAL ..
