Reduce Scrapping and Smelting, Promote Component Reuse > Engine Powered
> Diesel
> Cook County
> Used
> Professional diamond blocks fits edco concrete grinder
Professional diamond blocks fits edco concrete grinder
(1) SETS (3 TOTAL BLOCKS) OF PROFESSIONAL GRADE TRUELINETM DIAMOND BLOCKS WITH (6) SEGMENTS PER BLOCK. INCLUDES (1) SET OF WOOD PEGS & (1) SET OF NYLON PEGS. THIS PRODUCT IS MANUFACTURED FOR CONCRETE FLOOR GRINDERS IN AIDING IN REMOVING THIN LAYERS OF COATINGS (URETHANE OR EPOXY ) AND TOPPINGS WITHOUT CLOGGING. DIAMOND BLOCKS CAN ALSO PROVIDE SMOOTHING TROWEL MARKS, UNEVEN/ROUGH OR PATCHED SLABS AND LEVELING ON CONCRETE OR TERRAZZO. PROVIDES MATERIAL REMOVAL RATES UP TO SEVEN TIMES FASTER THAN GRINDING STONES...
STANDARD BLOCKS CARRY (4) OR (5) SEGMENTS PER BLOCK & .250 (1/4") SEGMENT HEIGHT
PROFESSIONAL TRUELINETM DIAMOND BLOCKS CARRY (6) SEGMENTS PER BLOCK & .375 (3/8") SEGMENT HEIGHT FOR AN ADDITIONAL 25% TO 30% GRINDING LIFE!
YELLOW SERIES: FOR HARD ABRASIVE EXPOSED CONCRETE AGGREGATE. SOFT DIAMOND MATRIX BOND FOR A 80/20 RATIO CONCRETE TO EPOXY
RED SERIES: FOR GENERAL PURPOSE GRINDING. MEDIUM DIAMOND MATRIX BOND FOR A 50/50 RATIO CONCRETE TO EPOXY
BLUE SERIES: FOR EPOXY MORTARS, NON ABRASIVE MATERIALS. HARD DIAMOND MATRIX BOND FOR A 70/30 RATIO EPOXY TO CONCRETE
FITS FOLLOWING EDCO FLOOR GRINDERS:
TAKES 3 DIAMOND BLOCKS (1) SET
2EC-1.5B, 2EC-2B,2EC-3B, 2GC-5.5H, 2GC-11H AND 2GC-11P
TAKES 6 DIAMOND BLOCKS (2) SETS
TAKES 12 DIAMOND BLOCKS (4) SETS
FITS HUSQVARNA / TARGET DUAL TRAC RG 2112
TAKES 6 DIAMOD BLOCKS (2) SETS
I just wanted to take some time and congratulate you on your product.
We recently ordered the Yellow Diamond Blocks for the Edco 2GC and were completly blown away by them. While the Edco Dyma Serts (official Edco blocks) were supposed to last 30,000sf, they were only lasting 6,000sf. We were grinding 35,000sf and only wish we had found you before...we were able to grind 13,000sf with your product (just like it was promissed to us), but unfortunately those were the last 13,000sf on that job, and I had gone through 4 sets of the Dyma Serts @ around $800.00 each. We will definitely use your company in the future as needed. Please feel free to use us as a reference for your product and company if necessary. Guillermo VazquezProject Manager FOX FLOORINGNew Construction * Commercial * Sports Floors * Retail Photobucket
