Reduce Scrapping and Smelting, Promote Component Reuse > Engine Powered
> Diesel
> Cook County
> Used
> Dynisco wide ranging bridge / dc isolator.. RT350-V1
Dynisco wide ranging bridge / dc isolator.. RT350-V1
These are brand new never used.
Remote Strain Gage to DC Transmitter
Field selectable input/output ranges Adapts to a variety of applications
Non - interactive zero and span adjustment Adjust once
Optically isolated output Free from internal interference
Convenient shunt calibration switch Convenient matching to transducer
LIfetime warranty No service problems
0.01% of span or less Excitation stability: 0.01% per C
1 K Ohm minimum for voltage; Temperature stability: 0.02% of span per C
Operating temperature range: -10 to +60 C (14 to 140 F)
70 ms typical; 10 ms available (DF) Power: 115 Vac 10%; 50/60 Hz 3.5 W maximum
100 dB minimum Dimensions: 2.75 in. (69.85 mm) H X 1.75 in. (44.45 mm) X 2.38 in. (60.45 mm)
0 to 10 Vdc settable in 1 Vdc increments 120 mA maximum at 10 Vdc
The versatile model RT350 signal conditioner accepts an input from strain gage sensors and provides an opto - isolated, amplified DC output. Typical
applications include providing an interface to recorders, data loggers and other process monitoring and control systems. The RT350 enables easy and safe
adjustment of the output signal at the control panel, versus at the machinery. With its plug - in design, red and green diagnostic LEDs and convenient shunt
calibration switch, the RT350 is the universal solution for your strain gage signal conditioning requirements.
To see a picture and more info click on the link below:
http:// /products/mc/datasheets/rt350.pdf