Reduce Scrapping and Smelting, Promote Component Reuse   >   Engine Powered   >   Atmel avr-P28 prototype board ATMEGA8 ATMEGA48 ATMEGA88

Atmel avr-P28 prototype board ATMEGA8 ATMEGA48 ATMEGA88


Click for view in large resolution AVR-P28 prototype board: top side view
Click for view in large resolution AVR-P28 prototype board: bottom side view
AVR-P28 AVR MICROCONTROLLER PROTOTYPE BOARD FOR 28 PIN DEVICES WITH STKxxx COMPATIBLE 10 PIN ICSP
With this board you can develop and prototype with any 28-pin ATMEL AVR microcontrollers: Atmega8, ATmega48, ATmega88, ATmega168... and other
* ICSP 5x2 pin connector for in-circuit programming with AVR ISP. Compatible with STK200, AVR ISP v3.2, AVR ISP and other programmers
* RS232 Tx, Rx interface with MAX232 IC
* 8 MHz crystal on socket (user can replace with any value)
* reset IC (MC34064 or similar)
* status LED connected to PC5 via removable jumper
* DIL28 microcontroller socket
* +5V power supply voltage based on 7805
* extension pin headers for each uC pin
* four mounting holes 3.3 mm (0.13")
* FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
* dimensions 100x80 mm (3.9x3.15")
* AVR-P28 + ATmega8 Blinkng LED (C source and HEX)
* AVR-P28 + ATmega8 UART demo (C source and HEX)
* AVR-P28 + ATmega8 Button demo (C source and HEX)



Atmel avr-P28 prototype board ATMEGA8 ATMEGA48 ATMEGA88