Reduce Scrapping and Smelting, Promote Component Reuse > Electric Powered
> Non Food Feed Processing
> DuPage County
> New
> Brazed plated heat exchanger--catalogue
Brazed plated heat exchanger--catalogue
For more details of Brazed Plated Heat Exchanger
The brazed type heat exchanger consists a series of thin and corrugated stainless steel plates. These plates are compressed and brazed together with copper or nickel depending on the application. This creates flowing channels between plates, with one fluid in odd number channels and the other in the even number channels, thus reaching the purpose of heat exchanging. Different from the gasket seal type, brazing type uses soldering material (copper or nickel depending on the application) to seal the exchanger. By applying high temperature in the vacuum environment at the manufacturing process, it melts down the soldering material to form the seal between each plate.
ADVANTAGES ON THE BRAZED PLATE HEAT EXCHANGER
All plates uses SUS316 material. Brazing materials are offered in copper or nickel. These materials offer high
corrosion resistance against many kinds of fluids.
Thanks to the brazing process, plate heat exchangersare pressure resistant up to 45 bar.*
Carefully designed plate pattern of the corrugated plates easily achieve high thermal transfer rate in either
counter flow or parallel flow arrangement.
BPHE's SUS316 material structure offers higher working temperature range up to 200 .
BPHE is much lighter and smaller in weight and size compare to shell tube exchangers; about 1/5 the size of
the shell tube exchanger with the same capacity. This advantage makes BPHE easier to install and replace.
The corrugated plates are designed to achieve turbulence flow at low flow rate, no need for frequent
If you want to purchase Brazed Plated Heat Exchanger , ask us for more details.
