Reduce Scrapping and Smelting, Promote Component Reuse > Electric Powered
> Non Food Feed Processing
> Cook County
> Used
> Cold jet aero 75-dx dry ice blasting machine
Cold jet aero 75-dx dry ice blasting machine
Very low hour machine, works great and is ready to start working for you today. Includes supply and blasting hoses as well as 1" nozzle in good condition. Machine purchase from injection molding company where it accrued most of its hours.
Small dings and scratches on rotor (see picture), from normal wear and tear and shouldn't affect performance.
This single-hose high pressure, electric blasting system utilizes dry ice pellets in it's patented aerodynamic rotor assuring high reliability and a smooth pulse-free dry ice blast flow at blast pressures up to 140 psi (9.7 bar).
Variable dry ice pellet feed rate of 0 to 7 lbs (0 to 3.2 kg) per minute
Patented isolated slide-out hopper
Hour meter tracks maintenance intervals, job or department costing
Hopper lid's lift design opens for easy filling with dry ice, and sliding screen design with safety interlock switch disables machine when open
The dry ice blasting system includes one length each of general purpose dry ice blasting and supply air hoses, and tri-mode dry ice blasting applicator and nozzle (see pictures).
Large, fully isolated hopper (75 lb / 34 kg capacity)
Variable feed rate (0 to 7 lbs / 0 to 3.2 kg per min)
Normal pressure system (to 140 psi, 9.7 bar)
Necessary compressed airflow volume depends on the nozzle being used - with most Cold Jet blasting nozzles 50 to 150 cfm (1.4 to 4.3 m /min) is required at a 80 psi (5.5 bar) operating pressure.
Size (L X W x H): 34" / 86.4 cm x 20" / 50.8 cm x 40" / 101.6 cm
100-140 VAC, 1 PH 50/60 Hz, 9 amps
Hose and nozzle management devices
