Reduce Scrapping and Smelting, Promote Component Reuse > Electric Powered
> Metalworking
> Machining Centers
> Siemens simatic S5 115U cpu 943 off van dorn ht press
Siemens simatic S5 115U cpu 943 off van dorn ht press
115U CPU 943 PART NUMBER ON CARD 6ES5943-7UA11
THIS WILL FIT HT PRESSES THAT RUN THE SIEMENS CONTROLLER OP 398 AND op 400
THE CENTRAL PROCESSING UNITREADS IN INPUT SIGNAL STATES,PROCESSES THE CONTROL PROGRAM,AND CONTROLS THE OUTPUTS,IN ADDITION TO PROGRAM SCANNING FUNCTIONS,THE CPU PROVIDES INTERAL FLAGS ,TIMMERS,AND COUNTERS.
THE CPU CONTAINS A PROCESSOR AND TWO APPLICATIONS-SPECIFIC INTEGRATED CIRCUTS.THE MICO PROCESSOR HANDELS AL PROGRAMMER INTERFACE MODULE FUNCTIONS.PROCESSES SUBSTITUTION OPERATIONS AND INTERRUPTS AND CONTROLS THE S5BUS .THE MICO PROCESSOR ALSO CONTROLS THE APPLICATIONS IC,S THAT ARE RESPONSIBLE FOR PROCESSING MACHINE OPERATIONS QUICKLY.BESIDE THE OPERATING MEMORY SYSTEM.THE CPU CONTAINS AN INTERAL RAM.THE CPU HAS TWOSERIAL INTERFACES WHICH IS CONNECTED TO THE OPERATOR CONTROL PANEL(OP 398)
THE FRONT PANEL CONTAINS THE FOLLING OPERATOR FUNCTIONS.
SIEMANS SIMATIC S5 CPU OFF VAN DORN DEMAG HT INJECTION MOLDING MACHINE
THIS IS OFF A RUNNING VAN HT PRESS SIEMENS S5 CONTROL SYSTEM
PLUS 1 VAN DORN INSTRUMENTATION BOARD
PLUS 2 OUTPUT CARDS SIMATIC S5 6ES5 454-7LA11
