Reduce Scrapping and Smelting, Promote Component Reuse > Electric Powered
> Metalworking
> Machining Centers
> Manual
> Used
> Cole parmer polystat refrigerated recirculator 01238-25
Cole parmer polystat refrigerated recirculator 01238-25
COLE PARMER POLYSTAT REFRIGERATED RECIRCULATOR 01238-25
This unit was supersceed by the EW-12910-30 and the specs are similar.
Cole-Parmer Polystat Temperature-Controlled Recirculators
Cole-Parmer Polystat Temperature-controlled Cooling Recirculators; temp. range; -15-40 C; 208-230V; 60Hz
Sealable reservoir permits open-tank use
These new affordable recirculators provide you with clean, cool or warm water without the scale buildup or the costly waste water disposal normally encountered with single-use tap water systems. An internal pressure relief valve provides adjustable pumping pressure from 20 to 100 psi; front panel gauge allows you to monitor pressure. A sealable reservoir lets you use recirculators in both closed-loop and open-tank applications without coolant loss. A built-in filter cleans circulating fluid.
The 1/2" NPT(F) inlet/outlet ports allow hookup to a variety of external equipment such as electron microscopes, diffusion pumps, AA furnaces, and mass spectroscopy systems. Recirculators include male pipe adapters with barbed fittings for 1/2" ID tubing, 10-ft of reinforced PVC tubing, and 5-ft power cord; 120 VAC models also include a three prong plug.
yes, a sealable reservoir that matches suction tube pressure
copper,brass,PVC, nylon, PP and vinyl
3-digit, 1/2"H (0.1 C resolution)
(roll over link for article summary)
Bath and Circulator Specifications Terminology
Chiller/Recirculator Selection Guide
Learn how to choose the chiller that best suits all of your cooling needs
More Related TechInfo Articles
Click on the product image to enlarge
Pressure pump (Max flow at 0 head)
Pressure pump (Max head at 0 flow)
