Reduce Scrapping and Smelting, Promote Component Reuse > Electric Powered
> Metalworking
> Machining Centers
> Manual
> New transtector 2DS3/E3 alpu surge suppressor 1101-650
New transtector 2DS3/E3 alpu surge suppressor 1101-650
NEW Transtector 2DS3/E3 ALPU Surge Suppressor 1101-650
2DS3/E3 ALPU Lightning Protection/Surge Suppressor 1101-650
The ALPU 2DS3 surge suppressor is a high-speed, high-current solid state device designed to protect (2) DS3 Communication lines, (1) Ethernet CAT-5 line, and (1) 48 VDC pair. The ALPU 2DS3 uses only silicon avalanche suppression diodes (SASD). It connects to the service in a pass through configuration. The input and output DS3 connections terminate at two vertical TNC connectors. The input and output Ethernet connections terminate at two screw type terminal blocks. The input and output 48 VDC connections terminate at two screw terminal blocks. All of the input and output harnesses pass into the suppressor housing via waterproof strain reliefs. The molded plastic enclosure is also waterproof, and features integrated mounting holes that are concealed by the cover and an integrated gasket plus a Membrane Vent to release any build-up of pressure and moisture due to cable wicking and enclosure heating.
The ALPU 2DS3 is designed to accept (2) multi-conductor cables with an outside diameter up to .370 as well as (4) coaxial cables with an outside diameter up to .275 .
The suppressor is housed in a molded plastic enclosure that is 6.13 long, 4.5 wide and 2.5 tall. The enclosure mounts with #6 hardware.
Unit is new in box with manufacturer warranty/registration card and installation hardware.
