Reduce Scrapping and Smelting, Promote Component Reuse > Electric Powered
> Metalworking
> Lathes
> York 7.5 ton air cooled chiller 460V - tested & checked
York 7.5 ton air cooled chiller 460V - tested & checked
UNIT JUST SENT TO HVAC SHOP FOR COMPLETE RUN OFF & TEST, AND TOP OFF OF CHARGE. PERFECT, READY TO WORK!
This chiller does not have a reservoir tank on board. And a small Johnson temperature controller, or similar, will need to be integrated with your tank to give signal at terminal box within this chiller. We can source and provide this for a fee if desired.
**** this is a 3 phase unit! ****
Serial Number of this top unit is (S)NBMM020768
These are chillers, but you will find part number matches up with:
Split System Air-Cooled Condensing Units
Sunline 2000 Model H5CE090 H5CE090A46A
H = Split System Condensing Unit
090 = 7-1/2 tons cooling Nominal
helpful link: http:// /PDFFiles/246652-YTG-A-0404.pdf
Housing Material Close-grained Cast Iron, Seal Plate
Impeller Material Silicon Brass
Seal Material Standard, Carbon Ceramic Faces, Buna Elastomer and SS Parts
GPM of Water @ 20 Ft. of Head 46
GPM of Water @ 40 Ft. of Head 40
GPM of Water @ 60 Ft. of Head 31
GPM of Water @ 80 Ft. of Head 21
Best Efficiency GPM @ Head (Ft.) 28 @ 65
Best Efficiency Range GPM @ Head (Ft.) 16-38 GPM @ 85-58 Ft.
Wetted Materials Silicon Brass, Cast Iron, Stainless Steel, Carbon, Ceramic, Buna.
Bearing Type Ball, Permanently Lubricated and Sealed
call (***)-514-3800 or email ****@verizon.net for more information.
