Reduce Scrapping and Smelting, Promote Component Reuse > Electric Powered
> Metalworking
> Lathes
> Used
> Frymaster MJH50-2SC split pot fryer natural gas
Frymaster MJH50-2SC split pot fryer natural gas
Up for sale is a Frymaster model MJH50-2SC serial number 86H31604D that operates on natural gas and 120V single phase electric. The unit was purchased from a local hospital. Each side of the MJH50-2 - split pot fryer operates on 40,000 BTU/hr. has a maximum shortening capacity of 25 lbs., and has a frying area of 6-1/2" x 15". This fryer has all of the features and options of the MJH50 and gives the operator the discretion of using only half the fryer. It also allows the operator to keep from cross contaminating food flavor by utilizing separate fry pots.
The solid-state controller assures pinpoint accuracy of shortening temperature, extending shortening and producing a uniformly-cooked product. The sensor is mounted in the center to permit quick sensing of any temperature drop caused by cold food placed in either side of the cooking area. The infrared power burner directs its heat on a large heat transfer area to fry more product with less fuel consumption. The open-pot design has no hard-to-clean tubes and can easily be wiped down and cleaned by hand.
The large cold zone catches crumbs and sediment from the frying area. Since these particles are trapped in the cold zone, they do not carbonize, contaminate shortening or cling to fried products.
This item is available for inspection in our showroom in Erie PA and this listing will be ended early if it sells locally.
