Reduce Scrapping and Smelting, Promote Component Reuse > Electric Powered
> Metalworking
> Lathes
> New
> Pelco MPTAZ220DT pan/tilt, scanner and lens control
Pelco MPTAZ220DT pan/tilt, scanner and lens control
Pan/Tilt, Scanner and Lens Functions
The MPTAZ115DT, MPTAZ220DT, and MPTAZ24DT integrate pan/ tilt, scanner and motorized zoom lens functions into one desktop control and are for use with 120 VAC, 230 VAC, and 24 VAC pan/tilts or scanners. This convenient new control is also capable of auto/random scan operation, which helps to increase the equipment life because its shorter duty cycle reduces gear train and drive motor wear, cable fatigue, and motor temperature rise. Random scan offers the flexibility of continuous auto scan operation with an adjustable time delay that automatically returns to Random scan after approximately 30 minutes. In addition, the control offers an auto scan output pin for Pelco scanners. This output pin allows a scanner to auto scan when the unit is either in the Random or Auto setting. The control will, of course, operate a scanner in the manual mode using the left/right functions of the joystick.
* For use with 24 VAC and 120 VAC Pan/Tilts or Scanners
* AMP CPC-Type Connector used for 120 VAC Models; Terminal Strip Supplied for 24 VAC Models.
* Capable of Auto/Random Scan Operation
