Reduce Scrapping and Smelting, Promote Component Reuse > Electric Powered
> Metalworking
> Lathes
> Leica laser alignment machine control
Leica laser alignment machine control
Leica Laser Alignment Machine Control
Designed and manufactured by Leica the Laser Alignment Machine Control system is an economical addition to your Grader, Dozer or any construction grade machine in which you need to ensure you're making level cuts. This system is used with a laser level in which the laser will be set on your level or grade and the Machine Control system will do the rest. The laser receiver will detect the laser and tell the operator to move up or down to make sure accurate cuts and grades are achieved.
The ultra bright LED Display right on the laser receiver will tell you to move up or down based on your laser level setting. The laser receiver has an independent battery pack and can be used without the control box. The system can be attached to any power source on your machine using positive and negative wire connections. This system also comes with an in cab control box so you can see the LED display from inside the cab without adjusting to see the read out on the laser receiver.
This system is great for farm tractors, dozers, graders or any construction use you may need. This unit has been tested and is in confirmed working order.
