Reduce Scrapping and Smelting, Promote Component Reuse   >   Electric Powered   >   Food Processing   >   Cook County   >   New   >   Rothenberger 22A ridgid 1822 4-6" w 141, 161 collins

Rothenberger 22A ridgid 1822 4-6" w 141, 161 collins


YOUR LOOKING A USED ROTHENBERGER COLLINS 22A FOR CUTING AND THREADING UP TO 2" CONDUIT, PIPE OR BOLTS! THIS IS SIMILAR TO A RIDGID 1822-I THREADER, IN "VERY NICE CONDITION"! IT COMES WITH TWO SNAP-O-MATIC, SELF OILING DIE HEADS. LOADED WITH DIES 1/2"-3/4"AND A SET OF 1"-2", WITH THE THROUGH THE HEAD OILING SYSTEM (this means as the pipe is being threaded, oil is automatically pumped through the die heads keeping the cutting teeth bathed in oil!). THIS UNIT ALSO HAS AN AUTOMATIC CHUCKING SYSTEM THAT CHUCKS DOWN ON THE PIPE WITH THE FLIP OF A SWITCH AND UNLOCKS, OR UNCHUCKS WITH A FLIP OF THE REVERSING SWITCH. THIS UNIT INCLUDES A ROLLING WHEEL STAND AND A METAL TOOL CABINET! TWO DIES HAVE A SMALL CHIP ON ONE TOOTH OF THE DIE (THIS SHOULD NOT AFFECT THE THREADING PERFORMANCE), BUT THE REST ARE PERFECT!
THIS IS A VERY NICE UNIT! CHECK OUT THE PIC'S! AND MAY VARY SLIGHTLY FROM THE FOLLOWING DESCRIPTION.......
Rothenberger COLLINS CLASSIC 22 A
(Shown with optional open wheel stand)
Suitable for the most demanding pipework applications, site threading, prefabrication work, or even production type applications. Ideal for the tradesman or industry in general. Completely versatile - handles even difficult make-on or breakdown of fittings. Optional jaws for plastic-coated pipe.
* Heavy Duty, 115 V, universal AC/DC 50/60 Hz. Develops up to 2 3/4 HP
* 6 brush motor for higher torque
* 230 V 1 phase or 230 V 3 phase, optional
* Precision pipe cutter with dual guide for accurate pipe cutting
Spindle Speed No Load & HSS Precision Dies
* HSS Precision Dies - Long operating life
* HSS Precision Dies - Optimum cutting geometry and excellent chip discharge
* HSS Precision Dies - Resharpenable
* Collins SUPER GRIP chucking system. R/L chucking. 4 double chucks at both front and rear of machine ensure that pipe is automatically gripped and centered. The grip is absolutely non-slip
* Chuck jaws are easy to replace for both metal and plastic-coated pipe
Stands & Oiling and Lubrication
* Open wheel stand with tool tray
* Closed wheel stand with locking tool cabinet
* All stands optional equipment at added cost
* Noise level - 84db on A scale
* Rugged and proven oil pump
* Automatic oil feed for optimum cooling
* Large, easy-to-empty chip tray
* Oil Reservoir - 1 gallon, use Ro-Cool cutting oil, a special blend of sulfo-chlorinated mineral oil assures long die life and superior quality threads
* Snap-O-Matic die heads (2) are standard. Fast operating
* Simple, quick change of dies without time consuming adjustments
* All controls are clearly marked
* Automatically adjusted thread length
* Threading range: Pipe or conduit - 1/8" to 2", Bolt or rod - 1/4" to 2 1/4"



Rothenberger 22A ridgid 1822 4-6 Rothenberger 22A ridgid 1822 4-6 Rothenberger 22A ridgid 1822 4-6 Rothenberger 22A ridgid 1822 4-6 Rothenberger 22A ridgid 1822 4-6 Rothenberger 22A ridgid 1822 4-6 Rothenberger 22A ridgid 1822 4-6 Rothenberger 22A ridgid 1822 4-6 Rothenberger 22A ridgid 1822 4-6 Rothenberger 22A ridgid 1822 4-6