Reduce Scrapping and Smelting, Promote Component Reuse > Complete Machines
> Pre 1900
> DuPage County
> New
> 1 door stand alone access control kit with 1200LB elock
1 door stand alone access control kit with 1200LB elock
1 door stand alone Access control kit with 1200lb Elock
1 door stand alone Access control kit with 1200lb E-lock
* Non-networking simple door controller; logging 992 different users; supporting password, card, card+Pin three types of opening the door; setting function parameters by keypad and 3 indicator lights.
* DimensionL109mm*W87mm*H37mm PowerDC9-15V Register1.000 different users Max Reading rangeEM 80mm~150mm,Mifare 30mm~80mm Connecting 1 wiegand card reader Supporting various kinds of locksmagnet lock, plugging lock, pulse lock and cathode lock Working temperature20 C- 60 C Relative Humidity5% -98%
* Make sure you program the reader before you install on to the wall.
* Ensure that you strip the 12v1500ma transformer.
* This transformer is connected straight to the reader. ( refer to the manual in side the box of the reader)
* When you have given power to the reader you will then give power to the maglock and exit button through the reader.
* When installing the mag lock and exit button to the reader make sure you use 18/2 gauge wire.
* When installing the mag lock please make sure that the strike is not too tight. Keep the strike as loose as possible so it can make the proper contact with the lock.
* Proceed to follow the instruction from the reader and mag lock.
201HE Reader User Manual.pdf (687920 bytes)
