Reduce Scrapping and Smelting, Promote Component Reuse   >   Complete Machines   >   1940 1960   >   Cook County   >   New   >   Kent model KGS510 ahd automatic surface grinder

Kent model KGS510 ahd automatic surface grinder


KENT HYDRAULIC AUTOMATIC SURFACE GRINDER, MODEL KGS510AHD, 20" x 40" capacity
Serial number: 95077304 Born in factory May of 1995, Sold in service March 1996
This machine came out of service in running condition. The user informs me there is runout in the crossfeed axis of about 1/2 thou (.0005"). In other words the ways in the cross are worn and height changes .0005" in full travel of crossfeed. Machine was otherwise well maintained with spindle cartridge replacement about 1 yr ago.
Furthermore, I have not run this machine. I don't plan on running it. However, I will hook it up to power if you want to come visit my showroom. Otherwise, I feel that it is in running condition, but I can not attest to overall accuracy or exact condition.
Specifications and Information:
* Power controlled crossfeed is column travelling
* Auto Incremental down-feed
* Console setting crossfeed travel limits
* Full length rear splash guard
* Over-the-wheel diamond dresser
* Maximum travels are 44.5" x 21 5/8" (Longitudinal and cross)
* Maximum distance spindle Center to Table is 23"
* Useable maximum grinding thickness with 14" diameter wheel and chuck in place is about 12"
* Grinding wheel size is 14" diameter, 5" arbor hole (one balanceable flange included), nominal thickness is 1.5"
* Grinding wheel speed is 1725 RPM
Walker Hagou Holland made 20" x 40" Semi-Fine Pole Electro Magnetic Chuck with console built in variable power chuck control and demag cycle.
Magnetic separator and coolant system, Hydraulic system
Grinding wheel (worn) with balanceable grinding wheel flange
YES......we have the book on this machine
This machine is wired for 440/460/480 volts, 3 phase operation
Look at the pics....There is a pic of the entire machine from the left/front with the operators console on the right side. There is a pic from the back showing the Hydraulic Unit. There is close-up pic of the operators console. There are a couple of pics of the electrics. There is a pic of the data plate with serial number and date of birth. Go ahead......SUPERSIZE 'EM.
Read my Lips....(Sorry, George, Sr.)
This machine is on a skid, but it can be handled with a forklift. It weighs 11000 lbs. I would rather you pick it up with your flatbed truck or a double axle trailer. You should bring some tarps, cause you DON'T want it to get wet in the rain. We will load at no extra charge. For you folks who want to send a commercial truck, MAKE SURE you send a flat bed. Don't send a box trailer, because there is no good way to strap or chain down this machine inside a box trailer. You should send an "air-ride" flat bed truck, WITH TARPS. If you call them for a rate, tell them 11000 lbs., 10' of bed space coming from Memphis, Tennessee to your destination. I will package this machine good.... and wrap the machine with shrink wrap. I WILL QUOTE FREIGHT TO YOUR DESTINATION IF YOU WANT. Send me a question.
Machines must be removed from our facility within 14 days of sale. We reserve the right to charge storage fees after 14 days.



Kent model KGS510 ahd automatic surface grinder Kent model KGS510 ahd automatic surface grinder Kent model KGS510 ahd automatic surface grinder Kent model KGS510 ahd automatic surface grinder Kent model KGS510 ahd automatic surface grinder Kent model KGS510 ahd automatic surface grinder Kent model KGS510 ahd automatic surface grinder Kent model KGS510 ahd automatic surface grinder Kent model KGS510 ahd automatic surface grinder