Reduce Scrapping and Smelting, Promote Component Reuse > Complete Machines
> 1900 1920
> DuPage County
> New us cooler 8'X10' i/d walk-in cooler, saddle mt. ref-
New us cooler 8'X10' i/d walk-in cooler, saddle mt. ref-
US Cooler 8'x10' I/D Walk-in Cooler, Saddle Mt. Ref-NEW
* This walk-in comes with a 1 HP saddle mount indoor refrigeration system. System comes with a condensing unit, evaporator unit, and associated parts installed on a bracket that is designed to be mounted over the top of one of the wall panels. These systems must be installed on a panel with slots cut in the top to allow the bracket to go through the wall. These systems are hung over the wall before the installation of the roof. It does require the installation of the evaporator condensate line, which needs to be run to a drain. This refrigeration system rates a 3 on a scale of 5 with 5 being the hardest most technical to install and 1 being the easiest. This refrigeration system must be installed by a licensed refrigeration technician. Our company can assist you with this installation.
This indoor walk-in requires a minimum of 6,752 BTUs
* REFIRGERATION-Saddle mounted inside refrigeration system, self contained, med temp, 1 phase, 1 HP, hermetic, 208/230 volt. Includes: Copeland condensing unit, evaporator, thermostatic expansion valve, high pressure control, sight glass, drier, solenoid valve, thermostat. maximum low 35 degrees. Does not include refrigerant - R22(Refrigeration is based on an altitude of 5000 feet or less)
