Reduce Scrapping and Smelting, Promote Component Reuse > Antique Horse and Steam Powered
> Steam Tractors
> Let me repair your torque wrench for $44.95
Let me repair your torque wrench for $44.95
Let Me Repair Your Torque Wrench for $44.95!
For $44.95 we will repair any CDI, SNAP-ON, PROTO, STURTEVANT RICHMONT, or UTICA brand Torque Wrench to its original factory specifications. However, since there are so many different styles of Torque Wrenches out there, we can only offer this price on specific types. Therefore, in order to take advantage of this offer, we ask that your Torque Wrench meet the following 3 requirements.
Your Torque Wrench must be a CDI (Consolidated Devices Inc.), SNAP-ON, PROTO, STURTEVANT RICHMONT, or Utica brand. Sorry, at this time we cannot offer this price on any other brands. These are the most common brands we see, so chances are we will have any required parts in stock, and can get your Torque Wrench back to you as quickly as possible.
Your Torque Wrench must be a Micrometer-Adjustable style (twist handle). This is the style where you twist the handle in order to increase or decrease the tightening force. Sorry, any Torque Wrenches with a dial, needle, or any electronic models are not included in this offer.
The range of your Torque Wrench must fall between the range of 50 in/lbs and 250 ft/lbs. This means the lowest point on the range cannot be lower than 50 inch pounds, and the highest point on the range cannot be higher than 250 foot pounds. We have the capability to do up to 2000 ft/lbs in house, but models outside of the this specified range are not included in this offer at this time.
At this time, we cannot offer this price on any other Torque Wrenches besides the ones we ve listed above. However, if you have a different brand, style or capacity that needs repaired, send us an email or call us for a quote. We can
When your instrument arrives, it is disassembled, and the parts are ultrasonically cleaned. Then it is inspected and evaluated. At this time, any required replacement parts are installed. Then we will check your instrument against our certified laboratory standards, and it will be adjusted until it s calibrated to within manufacturer s original factory specifications.
