Reduce Scrapping and Smelting, Promote Component Reuse > Antique Horse and Steam Powered
> Steam Tractors
> DuPage County
> New
> Radiation monitor meter 50 mhz to 3.5 ghz freq. range
Radiation monitor meter 50 mhz to 3.5 ghz freq. range
Radiation Monitor Meter 50 MHz to 3.5 GHz frequency range, Brand New
* 50 MHz to 3.5 GHz frequency range.
* For isotropic measurements of electromagnetic fields.
* Non-directional (isotropic ) measurement with three-channel measurement probe.
* High dynamic range due to three-channel digital results processing.
* Configurable alarm threshold and memory function.
* High frequency (RF) electromagnetic wave field strength measurement.
* Mobil phone base station antenna radiation power density measurement.
* Wireless communication applications (CW , TDMA , GSM , DECT).
* Wireless LAN (Wi-Fi) detection, installation.
* Spy camera, wireless bug finder.
* Cellular/Cordless phone radiation safety level.
* Microwave oven leakage detection.
* Personal living environment EMF safety.
* RF power measurement for transmitters.
Measurement range (CW signal>50MHz)
Absolute error(@1V/m and 50MHz)
Frequency response (taking into account typ. CAL factor)
+/- 1.0dB (50MHz to 1.9 GHz) , +/- 2.4dB(1.9GHz to 35GHz)
Temperature response(0 to 50 )
Unless otherwise stated, all specifications hold under the following assumptions:
Sinusoidal signals; device in far-field of a source; probe head pointing toward source; ambient temperature +23 deg. C +/-3 deg. C; relative air humidity 25% to 75%.
Digital , triaxial measurement
Typically 1s ( 0 to 90% of meas. value)
mV/m , V/m , uA/m , mA/m , uW/m2, mW/m2, uW/cm2
Instantaneous measured value, maximum value or average value since power-on.
Measurement average time (in per-set steps)
Adjustable threshold with ON/OFF
Measurement calibration factor CAL
Manual data memory and read storage
99 sets ( only recall by meter )
9V battery, carrying case & manual
