Reduce Scrapping and Smelting, Promote Component Reuse > Antique Horse and Steam Powered
> Ploughs
> DuPage County
> Used
> Philips electronic ballasts-HFREGULATOR218TL-D220-240V
Philips electronic ballasts-HFREGULATOR218TL-D220-240V
NEW PHILLIPS ELECTRONIC BALLASTS - MODEL HF-Regulator TD 218 TL-D EII 220-240V 50/60Hz
History: These units were used for one of the medical lighting devices we import from Germany. Recently the manufacturer changed to a different model and we have overstock in the units we keep for replacement inventory. We want to turn some of these into cash and are willing to sell them at a reduced price to do so.
No. Available: Approximately 10
Lamp power can be regulated from 1 to 100%
Flat ballast design, 22 mm high
Digital control input according to the industry-standard DALI (Digital Addressable Lighting Interface) combined with the Touch and Dim pushbutton protocol
Protected against excessive mains voltages, incorrect connections and incorrect lamp use
Striation-free operation, no stroboscopic effects
Lamp starts at 10% (DALI 1..100% in 250 ms, from 100..1% in 100ms)
Automatic stop circuit is activated within 5 s in case of lamp failure (safety stop)
Ballast resets automatically after lamp replacement
Equipped with WAGO 251 connectors suitable for automatic wiring machines
Up to 75% reduction in energy consumption by using automatic lighting control systems (e.g. Philips ActiLume)
Quick programmed start: 0.5 s, flicker-free warm start by preheating the lamp electrodes enables lamps to be switched on and off without reducing useful life. Ideal for high switching frequency
Low energy consumption in standby 0.35 W
Smart power ensures constant light, independent of mains fluctuations
Philips HF-REGULATOR II gear is equipped with Extended Cable
Flexibility (ECF) Technology. ECF Technology is based on a dedicated integrated circuit that ensures independent control of lamps, and in doing so takes care that:
In case of long or asymmetrical wiring (e.g. with emergency units or bundled wiring) deep and stable dimming is guaranteed (possible consequences for electromagnetic interference and compatibility EMI/EMC to be checked)
Systems always remain operational in extreme conditions (e.g. low temperatures, lamp impurities at burning-in) in combination with the integrated anti extinguish control
Lamp life is unaffected by dimming position whilst energy savings are maximized
