Reduce Scrapping and Smelting, Promote Component Reuse > Electric Powered
> Non Food Feed Processing
> Simadre 40R 110/220V 40 amps dual volt plasma cutter
Simadre 40R 110/220V 40 amps dual volt plasma cutter
Brand New SIMADRE 40R DUAL VOLTAGE WELDER - simadrestore.com
SIMADRE PORTABLE 40 AMP PLAS MA CUTTER !!!
* Portable: This machine weights only 20 lbs and the box size is only 17 inches Length x 8 inches width x 16 inches height. This machine comes with torch and ground clamp and cable, air filter, regulator and some initial consumables.
* The newer semiconductor circuits with genuine Toshiba MOSFET component in this machine is designed quite well. Cooling system is using advanced Germany equipment. With reasonable care it should provide many years of trouble-free service.
* After all, this machine is powerful and well-equipped with same functions as other brands in the market!!!
* TOSHIBA Transistors (MOSFET)
* PAPST Advanced German Cooling System
* Max Severance Thickness: 3/4"
Cycle 60% at 40 Amps and 100% at 30 Amps
0.5 inches clean cut with 7.2 inches per minutes; 3/4 inches severance cut with 3.1 inches per minute
40 Amps under both AC 110V and 220V
50 and 60 Hz with operating air pressure as 65 psi @ 3 cfm
Plasma Cutter - Inverter Unit, 10 Ft Ground Cable & Ground Clamp, Torch with Hose, Electrode, Nozzle, Ceramic Shield Cup and Swirl Ring, Air Filter/Regulator, Hose, Clamps, Mounting Bracket and Owner Manual
