Reduce Scrapping and Smelting, Promote Component Reuse   >   Electric Powered   >   Non Food Feed Processing   >   Cook County   >   Fluke networks cableiq kit qualification tester ciq-100

Fluke networks cableiq kit qualification tester ciq-100


Fluke Networks CableIQ Kit Qualification tester (CIQ-100)
CableIQ, the first cabling bandwidth tester for network technicians.
As an IT professional, you have a tough balancing act. You re an on-the-spot problem solver. And you ve got your eye on future enhancements, seamlessly upgrading the network to higher speeds, while optimizing the current infrastructure. All this without adding staff and while working with smaller budgets.
That s why Fluke Networks designed CableIQ an easy-to-use cable troubleshooting and bandwidth qualification tester specifically for network technicians.
It has all the power you need to see whether your cable is qualified to support 10/100, VoIP or Gigabit Ethernet and quickly solve network connectivity problems in one intuitive, handheld tool.
CableIQ: See network infrastructure problems quickly
Isolate cabling problems from network problems. Save time and money by escalating fewer trouble tickets.
See existing cabling bandwidth. Four-second test quickly determines if your existing cabling can support voice/10/100, VoIP or Gigabit Ethernet.
Troubleshoot cabling performance faults. Determine why the existing cabling plant cannot support the desired network speed (e.g. connection fault at 7 feet).
Free up 10% or more of your switch ports. Discover what is at the far end of any cable, whether it is an open cable, a PC, an analog phone, or switch.
Detect speed/duplex mismatches in a matter of seconds. Determine a PC s duplex settings and compare settings to the connected switch all from one location.
Isolate faults easier with intelligent wiremap. Test for wiremap, length, shorts, split pairs or opens, and graphically see the distance to specific pin faults, such as pin 1 break at 37 feet.
Locate cables and wires with superior accuracy. Breakthrough IntelliTone digital signaling technology precisely locates cables in even the most chaotic wiring closet.
Empower frontline techs with an easy-touse tool. Intuitive user interface and graphical display guides users with little or no training required.
Avoid disputes over cause of network problems. Save results or upload them to a PC with Cable IQ Reporter Software (included).
CableIQ gives network techs new vision into cabling bandwidth
CableIQ is the first cabling tool designed for network technicians who need to troubleshoot and qualify cabling bandwidth. It gives even the most novice tech vision to see what speeds existing cabling can support, quickly isolate cabling from network problems, and discover what is at the far end of any cable. That means network techs can close trouble tickets faster, reduce on-call time, and save money by better utilizing their existing infrastructure.
Reduce escalated problems by as much as 30%
CableIQ s powerful troubleshooting capability and intuitive interface enable frontline technicians to identify and troubleshoot a wider range of infrastructure problems. Is the port active? Are the duplex settings matched? Is it a network problem or a cable problem? Can the cable support the required network bandwidth? CableIQ is the only tool that can answer all these questions before trouble tickets are escalated to the next level. Troubleshoot cabling faults in half the time CableIQ shows you whether your cabling is qualified to support the network s required bandwidth, and provides detailed informainformation on the nature and location of cabling performance faults. Intelligent wiremap graphically displays the cable s wiring configuration, and shows the distance to opens and shorts. Advanced diagnostics also identifies and locates non-wiremap related connection faults, such as crosstalk or large impedance changes. Built-in IntelliTone digital technology allows you to tone and trace without disconnecting from the network. With CableIQ, your techs can close trouble tickets faster by cutting cable troubleshooting time in half.
Ensure a smooth transition to VoIP or Gigabit Ethernet
When you deploy Voice over IP (VoIP) or Gigabit Ethernet, you want to make sure the existing cabling will support the bandwidth requirements of your new equipment.
Your cabling was certified, but moves adds and changes have rendered many links incapable of running desired speeds.
CableIQ quickly reveals whether a link, including patch cords, is qualified for voice, 10/100BASE-T, VoIP, or Gig. Knowing your cabling s bandwidth capabilities before upgrading can prevent countless hours of future downtime and labor hours wasted on unnecessary troubleshooting.
Cable types supported UTP, STP, FTP, SSTP, RG6, RG59, audio, security
Qualification autotests 1000BASE-T, 100BASE-TX, 10BASE-T, VoIP, 1394b S100, TELCO, Wiremap only, Coax
Supported tests Wiremap, length, cable signal performance, digital toner, analog toner, Ethernet port detection and identification, analog telephone detection, blink port light, continuity, speaker test, cable fault finding, video signal detection
Wiremap Can detect single wire faults and supports MultiMap mode with up to seven remote office identifiers. Draws proportional wire length to breaks. Detects Split Pairs.
Find fault Measures crosstalk and impedance and compares against appropriate limits based on qualification test selected.
Detects location of large point sources as well as distributed sources in the cabling if they are sufficient to disqualify the application.
Results storage Up to 250 qualification test results
Power Battery type: 4 AA (NEDA 15A, IEC LR6) alkaline batteries Battery life 20 hours of typical use, without backlight
Other battery types 4AA photo lithium, NIMH, NICAD supported
Dimensions and weight 7 in x 3.5 in x 1.75 in (17.8 cm x 8.9 cm x 4.5 cm) 1.2 lb (0.55 kg)
http:// /fnet_www/Search/playflash.aspx?p=/fnet_www/download/virtualdemo/CABLEIQ_PROMO/CABLEIQ.SWF
http:// /fnet_www/Search/playflash.aspx?p=/fnet_www/download/virtualdemo/CABLEIQ_V2/MAIN-PROMO.SWF
Don't forget to take a look my other great deals and hard to find items.



Fluke networks cableiq kit qualification tester ciq-100