Reduce Scrapping and Smelting, Promote Component Reuse > Electric Powered
> Non Food Feed Processing
> 8 tee plates f/bosch t-slot aluminum extrusions w/bolt
8 tee plates f/bosch t-slot aluminum extrusions w/bolt
8 Tee Plates f/Bosch T-Slot Aluminum Extrusions w/Bolt
This is a lot of 8 used T-Junction Joining Plates with 6 bolt holes and 1 Foot Hole. This plate is marked with a part number, 214Z200A, which we cannot tie to a manufacturer. However, these plates were used to connect joints of 45x45 Bosch profiles, so they are known to be compatible with 10mm-slot 45 Series profiles. They may also be compatible with other profiles. Cosmetically the plates are in good condition with scratches and scuffs from normal usage, and minor marks from the T-Bolt nuts.
* Length of long side: 342mm (~13-1/2")
* Height of right angle: 185mm (~7-1/4")
* Bottom Edge to center of bolt hole: 23mm (~7/8")
* Side Edge to center of bolt hole: 28mm (~1-1/8")
