Reduce Scrapping and Smelting, Promote Component Reuse > Electric Powered
> Metalworking
> Mills
> Miller syncrowave 200 907308
Miller syncrowave 200 907308
BRAND NEW- MILLER SYNCROWAVE 200 (907308)
Syncrowave 200 with Torch Package (907308) comes with all of the following: Syncrowave 200 No. , Remote Foot Control (RFCS-14) * Completely Assembled * 12-ft, 150-amp air-cooled WP1712SFDI Weldcraft torch with superflex nylon power cable & Quick-Connect. Electrode holder with Quick-Connect 10-ft. gas hose Regulator/flowmeter
YOU CAN CALL US 7 DAYS A WEEK 5:00AM-7:00PM PACIFIC TIME WITH QUESTIONS.
BRAND NEW MILLER SYNCROWAVE 200 (907308) JUST RELEASED BY MILLER LIST PRICE $2429.00
Complete with, foot control, regulator and hose, tig torch . Built in pulser. Also stick electrode holder cable and ground clamp.
Syncrowave 200 p/n: MIL 907308
THE POWER TO WELD MORE - More power, more features and more control in a simple, easy-to-use package at an affordable price.
Syncro Start Allows customized arc starts for more precise arcs and fine-tuning for each application based on tungsten diameter, material thickness and shielding gas mixture.
Features NEW! Built-in pulse control enhances weld bead and puddle control for improved appearance and quality - reduce burn through, coordinate the addition of filler material, and reduce the warping effects of distortion by reducing the average heat input.
NEW! Cable Management System uses dual cable hangers and foot control storage convienently attached to the power source side panels to allow all weld cables and the remote foot control to be neatly stored, preventing torch, cable, or remote damage.
NEW! 115v auxiliary power receptacle is conveniently located on the front panel, allowing for operation of a Coolmate torch coolant system or other small tools.
NEW! Syncro Start allows the operator to choose from three different starting conditions to optimize the application (Soft/Standard/Hot).
NEW! Dual digital meters allow for quick and easy viewing of actual and preset values of amperage and voltage.
NEW! Auto-Postflow protects the weld end zone and electrode by optimizing postflow time based on welding amperage - for adequate shielding every time without waste and no need for adjustment.
Arc hour/cycle counter records actual welding time and number of arc starts.
DIG Control allows the arc characteristics to be changed for specific applications and electrodes. Lower the DIG setting for smooth running electrodes like E7018 and increase the DIG setting for stiffer, more penetrating electrodes like E6010.
Input Power Requires 1-Phase Power
Rated Output 150 A at 26 VAC, 40% Duty Cycle
Output Power Range 5 - 200 Amps
CLICK ON LINK BELOW FOR TIG ACCESSORIES AND CONSUMABLES.
