Reduce Scrapping and Smelting, Promote Component Reuse > Electric Powered
> Metalworking
> Bunn cds cds-2 maintenance kit w/free tools frozen
Bunn cds cds-2 maintenance kit w/free tools frozen
BUNN CDS-2 MAINTENANCE KIT p/n 28106.0000
INSTALLATION TOOLS AND FULL COLOR INSTRUCTION MANUAL INCLUDED FOR FREE!
FREE TELEPHONE SUPPORT FOR KIT INSTALLATION AND TROUBLESHOOTING
This is the six-month periodic maintenance kit for the Bunn CDS-2 frozen beverage machine. You should install this kit every six months of use or after the machine has been stored for a period of non-use. Failure to install this kit will inevitably lead to expensive repairs. There are sufficient parts in each kit to service a two-hopper CDS machine.
You will receive at no additional cost the tools needed to install this kit. Included in the kit is one 6-in-1 screwdriver with:#1 phillips blade, #2 phillips blade, #1 straight blade, #2 straight blade, 1/4" nut driver and 5/16" nut driver; a bright LED flashlight with batteries; a seal insertion tool; and a lubricant application brush. With these tools you can: remove the auger motor covers; use the flashlight to check the alignment of the auger shaft split pins to assure they are in the proper position to avoid damaging the torque sensor board; remove the auger motor; remove the front shaft seal and shaft bushing; check the shaft alley with the flashlight for product leakage; properly install the shaft seal; and then install the remainder of the kit and reassemble the machine. These tools are the essentials for working on the CDS and Ultra machines and they are yours for free!
The Bunn frozen beverage machines are hearty and reliable beasts - they do a great job, are easy to use, easy to maintain and repair and will last for years and years. But, like every piece of machinery, they require a little maintenance to continue performing well. Installation of the parts in this kit takes about 20 minutes and all you'll need is one screwdriver and we'll provide the help you'll need for free via our 800 number!
2 Bulbs for the lighted lid (P/N 27446.0000)
2 Auger Shaft Seals (P/N 26780.0000)
2 Auger Shaft Bushings (P/N 26781.0000)
2 Cooling Drum Seals (the big white ones for the back of the hopper) (P/N 26782.0000)
2 Hopper Drum Seals (the smaller white ones at the front of the hopper) (P/N 26792.0000)
4 Faucet O-rings (stops leaky faucets) (P/N 28108.0000)
1 Shaft lubricant - "Krytox" (P/N 29563.0000)
1 Big tube of food grade lubricant "Lubri-Film" (P/N M2550.0000)
1 Seal insertion tool (P/N 28395.0000)
1 6-page ful color instruction manual with annotated photos
DON'T BE INTIMIDATED - YOU CAN INSTALL THIS KIT YOURSELF AND SAVE YOURSELF LOTS OF CASH!
If you have questions, call us on our 800 number and we'll walk you through the installation of the parts in this kit. It really is simple, requires only one screwdriver, and will take you less than half an hour. We can also help you diagnose other problems you may be experiencing with your Bunn CDS or Ultra machine and can supply the parts and instructions you may need to get your machine running like a champ. We are sure that if you can hold a screwdriver, with our help you can fix almost everything on this machine yourself.
Learn more about this kit at:
BE SURE TO CHECK OUR STORE FOR THIS KIT FOR THE ULTRA MACHINE (Includes the flat faucet seal)
