Reduce Scrapping and Smelting, Promote Component Reuse > Complete Machines
> Pre 1900
> DuPage County
> 2 - 5" X100' rolls epdm rubber roofing flashing tape
2 - 5" X100' rolls epdm rubber roofing flashing tape
SELF VULCANIZING FLASHING JOINTS
All FLASHING DETAIL: shall be sealed using 5", 6" OR 12" SELF VULCANIZING FLASHING TAPE. All joints shall be shingled to shed water toward the drains, scuppers, etc.
Contact surfaces for the FLASHING TAPE shall be cleaned to remove construction dirt using a light application of unleaded gas on a clean, lint-free rag. After cleaning apply Anjon primer to surfaces before applying seam tape.
The FLASHING TAPE shall be securely bonded to the deck sheet along the previously marked bottom sheet. The flashing shall be formed from side to side to insure a minimum of 2" overlap of the flashing beyond any edge piece. The release paper shall be carefully removed without disturbing the placement of the flashing or deck sheet.
The lap joint shall be "walked in" to fix placement and thoroughly rolled with a 2" metal roller in the direction perpendicular to the length of the joint.
These are 2 - 5" x 100' rolls, and weighs 25 lbs and is
Plus freight to your location.
