Reduce Scrapping and Smelting, Promote Component Reuse > Complete Machines
> 1900 1920
> New smart card reader writer usb device pc environment
New smart card reader writer usb device pc environment
NEW Smart Card Reader Writer USB device PC environment
This smart card reader/writer is a USB full speed device which is the interface for the communication between a computer and a smart card. It is designed for the PC environment, and is the ultimate smart card peripheral for a PC.
USB full speed interface to PC with simple command structure
Read and write all microprocessor cards with T=0 or T=1 protocols
Supports SLE 4418/28/32/42 memory cards
Supports most common memory-based smart cards, including I2C bus protocol cards (from 1k bits up to 1024k bits) and secure memory cards (Atmel AT88SC153 and AT88SC1608)
Support 1.8V. 3V and 5V MCU cards
Certificate of conformance: ISO 7816-1/2/3, PC/SC, CE, FCC, Microsoft WHQL, EMV certified
ISO7816-1/2/3 compatible smart card interface
Support PPS (Protocol and Parameters Selection) with 1743 307200 bps in reading and writing smart cards
768 bytes RAM size and 16K bytes ROM size
Home Banking and Home Shopping
Checking the balance of account of re-loading an electronic purses
Universal Serial Bus Interface
type:USB full speed, four lines: +5V, GND, D+ and D-
Standard:ISO 7816 1/2/3, T=0 and T=1
Smart card read / write speed:1743 307200 bps
Short circuit protection:+5V / GND on all pins
The presence of the smart card power supply voltage is indicated through a green LED on the reader
Card insertion cycles:min. 100,000
Location:Under the removable dark lid
Dimensions:97mm (L) x 72mm (B) x 18.5mm (H)
EMV Level 1, ISO7816-1/2/3, PC/SC, CE, FCC, Microsoft WHQL ME, 2K, XP
Windows 98, ME, NT, 2000, XP, 2003, Vista, Mac and Linux
