Reduce Scrapping and Smelting, Promote Component Reuse   >   Complete Machines   >   1900 1920   >   DuPage County   >   Used   >   Banner S18SP6L retroreflective photoelectric dc sensor

Banner S18SP6L retroreflective photoelectric dc sensor


* EZ-BEAM technology for reliable sensing without the need for adjustments
* Completely epoxy-encapsulated to provide superior durability, designed to meet
* rigorous IP69K standards for use in 1200 psi washdowns.
* Innovative dual-LED indicator system for simple sensor performance monitoring
* Advanced diagnostics to warn of marginal sensing conditions or output overload
* Retroreflective Sensing Mode with 2M (79 ) Range
* 950 nm Infrared LED, PNP (Current Sourcing)
* 18 x 1mm Threaded Body x 59.2 mm long
* Operate on 10 to 30V DC (10% max. ripple); supply current (exclusive of load current) 25 mA
* Protected against reverse polarity and transient voltages
* Output Configuration SPDT solid-state dc switch; PNP (current sourcing)
* Light Operate: N.O. output conducts when sensor sees its own (or the emitter s) modulated light, Dark Operate: N.C. output conducts when the sensor sees dark; the N.C. (normally closed) output may be wired as a normally open marginal signal alarm output, depending upon hookup to power supply
* Output Rating = 150 mA maximum (each) in standard hookup. When wired for alarm output, the total load may not exceed 150 mA.
* Protected against false pulse on power-up and continuous overload or short circuit of outputs
* Output Response Time: 3 ms ON and OFF, NOTE: 100 ms delay on power-up; outputs do not conduct during this time.
* Repeatability: 750 s, Repeatability and response are independent of signal strength.
These came in a lot of spare parts. The threads, controls, connections and cords are all unharmed, both mounting nuts are included and some cords are terminated with Turck Block Connectors as shown in the picture. The cords vary in length from 57-67 . These units are also clean.



Banner S18SP6L retroreflective photoelectric dc sensor