Reduce Scrapping and Smelting, Promote Component Reuse > Complete Machines
> 1900 1920
> DuPage County
> New
> Generac 44HP engine horizontal
Generac 44HP engine horizontal
We truly need 7 to 10 working days to custom build a reconditioned engine for you
These engines also weigh 95 to 125 lbs
Safe packaging materials costs us $35.00 to $45.00
hello again. i have redone my throttle because i wasnt happy with the way i had it. so i guess now i am getting the full throttle. i thought i was before but i was wrong. now i am pulling 330 pounds of thrust on my scale. so if this all holds true and i am getting 7.5 pounds of thrust per hp out of the engine i am now at the 44 hp. its just what you said it would be. so that carb was the ticket for this engine. and make darn sure you are getting that throttle all the way open. but again i thank you so much for your help and a fine product. will try and send people your way. but have a very great xmas and again thank you so much.
ps now with this added thrust i will be at a lower rpm dureing level flight so far less stress on the engine. only go to full throttle for short periods of time. never more than a minute the way i fly. thank you again
Generac 44hp engine with an estimated 68lb ft of torque
Check our store for many other engine listings.
Contact us for many other engine options
We take a GTH990 engine & install a higher lift camshaft, flat top higher compression pistons, creating a 998cc engine with 9.8-1 compression ratio
All Parts installed are OEM Generac Parts
Available with optional Combo Hour meter/Tachometer (see pics)
Available with optional LOW OIL Pressure Shut Down Sentry (see pics)
44hp Generac Carb on left & Kohler Carb on right in Pics
1 1/8"x4" shaft or 1 7/16"x4.4" shaft available
Typical MSRP for these engines is over $2800.00 from most MFG's
This engine requires 89 octane or higher premium fuel
Warranty is void if the engine is operated on low octane fuel
1 YEAR limited WARRANTY offered by us!!!!!!!!!!!!!!!!!
Note: Air Cleaner can be removed & mounted anywhere (using standard automotive radiator hose) on your equipemnt if a low profile is required
Latest Specifications from us for the Generac GTH998 engine
Note: Muffler is NOW included for no additional charge.
Muffler & Muffler Support Brackets valued at $160.00 (Included in listing price)
Front PTO Shaft available (not included in listing price) $82.40
44hp estimated & estimated 68lbft of torque are estimates based on the upgrades with higher lift camshaft & high compression OEM pistons.
Available with engine mounted Ignition Switch & Throttle/Choke Controls for an additional $85.00 (see pics)
Please check the dimensional drawing in our listing if you are replacing a Honda, Kawasaki, Briggs, Wisconsin or Kohler engine to check for clearance or any modifications that may need to be made.
Made in the Heartland of the USA in Wisconsin!!!
None of the other mfg's of big block air cooled engines can make that statement
1 1/8" Shaft standard, 1 7/16" shaft available
GENERAC Horizontal Shaft Engine Has a Whopping 68ftlbs of torque@2400rpm.
This is the most important measurement of an engines ability to perform work!!!!!
Check this link: http://science.howstuffworks.com/fpte5.htm
Great for Stump Grinders, Saw Mills ETC.
Direct bolt in to replace the Kawasaki & Kohler Horizontal Shaft engines from 20hp & up on Bobcat, Dixie Chopper, Bad Boy or any other large ZTR with A Horizontal
Will replace Briggs, Kohler, Kawasaki & Honda Engines.
Designed to last 3000+ hours if maintained properly
* This BRUTE of an engine is made in the USA.
* It Features a massive 66lb-ft of torque.
* It s low profile make it easily adaptable as a replacement for the smaller hp Briggs & Kohler Engines
* It will also easily replace the big Block Kohler, Briggs, Honda & Kawasaki engines
Horizontal Shaft V-Twin Cylinder
Air-Cooled OHVI Industrial Design
Full Pressure Lubrication (Automotive Type Gerotor Oil Pump)
Engine Oil Cooler, Utilizes High Velocity Flywheel Fan Air
Low Oil Pressure Switch, Normally Closed (Not Connected)
High Torque Industrial 12V Solenoid Shift Electric Starter
Large Hardened Crankshaft Bearing Journals
Special Alloy Sleeve PTO and Flywheel End Bearings
Hardened Camshaft, Helical Cut Gears
Hardened Valve and Valve Seats
Cam Ground Piston Skirt (Elliptical)
3 Piece Automotive Type Oil Ring
Larger Venturi 2-Barrel Carburetor than the competitors Carb,
44hp est Generac Carb on left & Kohler 40hp Carb on right in Pics
Heavy Duty X-Torq Governor with Thrust Needle Bearing
Heavy Duty High Capacity Donaldson Commercial Air Cleaner
Rotating Flywheel Cooling Air Screen
12 V, 20 Amp Regulated Charging System
Wire Harness with Packard Connector
Remote Throttle Control (Can be Converted to engine mounted)
Remote Choke Control (Can be Converted to engine mounted)