Reduce Scrapping and Smelting, Promote Component Reuse > Antique Horse and Steam Powered
> Threshers
> New fluke T5-600 voltage continuity and current tester
New fluke T5-600 voltage continuity and current tester
NEW Fluke T5-600 Voltage Continuity and Current Tester
Fluke T5-600 Voltage Continuity and Current Tester stays connected to live lines much longer than solenoid-type testers, and is rugged enough to withstand a 10-foot drop. Designed to conform to IEC 1010-1 Category III standards. OpenJaw feature lets you check current up to 100 amps without breaking the circuit. Displays resistance to 1000 ohms. Detachable Slim-Reach test probes, designed to fit in wall sockets and tight spots, stow neatly in the back of the tester. Auto-off mode conserves battery life. Comes complete with (2) AA batteries, test leads with detachable probe tips, and instruction sheet.
* Automatically measures volts ac and volts dc with precise digital resolution
* Displays resistance to 1000 Ohms
* Easy and accurate OpenJaw current measurement
* Detachable SlimReach probe tips are customized for national electrical standards
Threshold: On at <25 Ohms, off at >400 Ohms
Threshold: Guaranteed on by 30V ac
Humidity (Without Condensation):
0 to 95% 41 to 86 F (5 to 30 C)
0 to 75% 86 to 104 F (30 to 40 C)
0 to 45% 104 to 122 F (40 to 0 C)
0.1 x (specified accuracy)/degree F
Between any terminal and earth ground
1.2" x 2.0" x 8.0" (30.5 x 51 x 203 mm)
200 hour zinc chloride, 400 hour alkaline
Type: Heavy duty, flexible leads rated for 1000V use.
Field replaceable leads terminate in male shrouded
Probes: One red, one black, of two tip.
Detachable Slim-ReachT probe tips in one
