Reduce Scrapping and Smelting, Promote Component Reuse > Antique Horse and Steam Powered
> Ploughs
> Milwaukee PH600 tester meter aquarium/hydroponics/lab
Milwaukee PH600 tester meter aquarium/hydroponics/lab
Manufactured by Milwaukee Instruments
*FREE Calibration Buffer Solution Included
pH 7.01 Buffer Solution INCLUDED FREE !!!
Pre-mixed - Ready for use when you are.
With your purchase of this pH meter we will include a free packet of 7.01 buffer solution. Each packet contains 20 ml of pre-mixed, ready to use buffer solution.
A $4.95 Value - Yours Absolutely Free!
This Milwaukee Instruments Digital pH Meter is The Most Popular pH Meter for Use in Schools, Pools, Salt/Freshwater Aquariums, Gardening and all other water applicable media. At the cost of just a few rolls of litmus paper, you can have one of the industry's best pH testers. The pH600 supplies you with fast accurate readings on a large easy-to-read LCD. The pH600 is fast, accurate, lightweight and pocket-sized making it a valuable instrument for students and others alike. Testing pH values has never been easier!
The pH600 supplies you with fast and accurate readings on a large LCD. Calibration is simply, using only1 calibration solution and the included screwdriver to turn the trimmer screw.
Hydroponics - Nutrient solutions
Various industrial applications
The pH600 cannot determine the pH of soil directly. You should mix 2 parts of distilled water with 1 part of soil. Stir the mixture and allow the soil to settle. Then test the water to get the pH value of your soil.
approx. 700 hrs. continuous use
Manual 1 point through trimmer
using a 7.0 buffer solution (INCLUDED)
32 to 122 F (0 to 50 C); RH 95%
Simply push the switch to the ON position. Stick the end of the meter into your solution. The pH will be shown in the easy to read LCD display.
Even though each meter is calibrated at the factory and checked for quality, You should check the calibration of your pH meter before using it for the 1st time. Simply cut off the top of the calibration packet, turn on your meter and insert it into the packet. Stir it to remove any air bubbles on the electrode. Use the small screwdriver to turn the trimmer screw on the back of your meter until the display shows 7.0. Rinse the meter in tap water and it's ready to use. For the most accurate readings, you should check the calibration before each use.
The probe (small glass bulb on the tip of the tester) should be kept wet when not in use. Fill the cap with some regular tap water to keep the probe wet. All pH probes use a cloth junction in the construction of the probe. This cloth is part of the diagnostic process in reading the pH. If the cloth becomes dry the unit will not be able to read.
Check out all our other pH Testers
Hanna pH, EC, TDS, Temp COMBO Tester
Milwaukee pH600 Meter comes with FREE 7.01 Calibration Buffer and a calibration screwdriver
We are selling way below retail!!
All of our products carry a 100% Satisfaction Guarantee!
If any item is damaged or broken upon receipt, you must contact us within 3 days
*This product also carries a 30 day manufacturers warranty.
and $1.00 for each additional pH600 meter.
Estimated delivery time: 2-5 business days. Delivery times may vary and are only estimates.
Bubble Mailing envelope: $1.28 ~ Mailing label (1/2 sheet self-adhesive): $.26
LOOKING FOR A TDS METER? WE HAVE THEM TOO!
Reads TDS up to 999 PPM Comes with:
Plastic Storage Case Calibration Screwdriver
Reads Temperature Automatic Shut Off
We have been authorized HM Digital & Hanna Distributors for over 10 years.
