Reduce Scrapping and Smelting, Promote Component Reuse > Antique Horse and Steam Powered
> Ploughs
> 4' bullet resistant acrylic clear vs bullet proof glass
4' bullet resistant acrylic clear vs bullet proof glass
You are purchasing 1 NEW Bullet Resistant Security Polycast Acrylic Sheet 4' x 8' ft. (1 1/4" Thick x 48" Wide x 96" Long) MP 1.25 (UL level 1) Clear Product, Unlike Bullet Proof Glass
Bullet Resistant Security Polycast Acrylic Sheet 4' x 8' ft.
(1 1/4" Thick x 48" Wide x 96" Long) MP 1.25 (UL level 1) Clear Product, Unlike Bullet Proof Glass
Our bullet resistant Security Acrylic sheet protects against handguns of medium power, such as the 9 mm and Super 38 Automatic - any handgun with a muzzle energy of 380 to 460 foot-pounds.
Despite improvements in security technology, bullet resistant barriers have been proven to be the only measure that deters crime before it happens. This is especially important considering there is approximately one convenience store robbery for every two convenience stores in the U.S. and that bank robberies have increased by 136 times in the past 50 years.
Polycast offers a solution to these problems and when one considers the four most important characteristics in choosing a bullet resistant sheet (adequate protection, weight, optical clarity, and value) the choice is obvious.
From this lightweight MP 1.25 sheet to Acryshield L3, Polycast offers ballistic protection against virtually all hand guns including super power .44 magnum models.
Polycast weighs 48% less than glass with the same UL rating and slightly less than polycarbonate with the same degree of bullet resistance.
Crystal clear Polycast transmits significantly more light than conventional bullet-resistant glass or polycarbonate. It is attractive in almost any environment and maintains its beauty over time.
Because Polycast will not turn yellow, haze, degrade or turn brittle when exposed to the elements, it typically provides a much better long term value than other forms of bullet resistant glass. Plus, it can be cut to any size using standard tools without chipping or cracking and can be formed into curved shapes. Its edges can also be polished to a beautiful clear luster, unlike polycarbonate, where edges turn black when polished.
* Meets the test requirements of Building Code class CC2,
* ANS, Z97.1-Safety Glazing Material,
* ANS, Z26.1-Motor Vehicle Safety Glazing Material,
* Dade County Approval, Federal Specification L-P-391D+
Maximum Continuous Service Temperature: 170 F
Minimum Continuous Service Temperature: -26 F (lowest temperature tested for bullet-resistance)
Please contact us with your Zip Code for information on the Freight Cost.
If you require bullet resistant clear acrylic in custom sizes, shapes, tints cut-outs or with Polycast .
Transmission: >90% Haze <1%
* Polycast SAR Super Abrasion-Resistant Coating:
* Weight (pounds per square foot)
* Contact us with your zip code for information on the freight cost.
